Matterport Pro 3 capture · St Peters, Sydney
Your building,
captured in 3D
Tours to show, plans and CAD to build from.
3D laser scanning, digital twins and measured CAD for Sydney developers and builders.
What we capture
The building as it stands, to about ±20 mm at 10 m.
That is the Matterport Pro 3 manufacturer figure, built for milestone capture, as-builts, coordination and the model your team documents from. Interiors and walkthroughs are our core work. Exterior capture needs a clear perimeter of several metres around the building, and facades to about three storeys. The scan is not a millimetre-accurate survey, and it is not a registered surveyor’s plan.
01 · Construction stages
Scan it before it closes up
Every stage of a build has a moment after which the record is gone: the pour, the plaster, the handover. One scan at each of them, priced on the same tiers, gives you a dated record your team, your client and your insurer can all walk through. The last stage has no deadline: once the building is finished, that same walkthrough is what you show buyers, tenants and boards.
Existing conditions
Before you design or demolish
The building as it stands, measured, before anyone touches it. Design against the real thing, not the last set of drawings.
Hosted twin + measured plans; add CAD or BIM for the design team.
Tier 2 or Tier 3 →
Pre-construction dilapidation
Before works start next door
A dated, navigable record of the neighbouring property. Proof, not opinions, if a crack appears later.
Hosted twin, time-stamped; measured as-builts on request.
Tier 1 or Tier 2 →
Pre-slab
Before the pour
Every in-slab service, conduit and set-down captured before the concrete hides it. Core and cut later with confidence.
Hosted twin with measurement; point cloud for the engineer.
Tier 1, with progress capture →
Pre-plaster
Before the walls close up
Framing, plumbing, electrical and services recorded in place. A walkable record every trade can measure from, instead of a camera roll.
Hosted twin with measurement; as-builts where the project needs them.
Tier 1, with progress capture →
Defects and final
At practical completion
The finished building, room by room, as a condition record at handover and a marketing walkthrough on the same day.
Hosted twin; renders for the listing; as-builts for the O&M manual.
Tier 1 to Tier 3 →
Marketing and presentation
Once the space is ready to show
A walkthrough anyone can open from a link and move through at their own pace. Put it in the listing, the leasing campaign, the tender submission or the board pack, so the people deciding can see the space without standing in it.
Hosted twin with a share link, embeddable in your own site; renders and stills for the deck or the listing.
Tier 1 →One engagement that keeps paying: existing conditions, monthly progress, the handover model, then a hosted twin the operator pays to keep live. Progress capture can be added to any tier; the fixed price for a staged programme comes back within 24 hours.
02 · What you get
One scan, everything you need
For Sydney developers, builders, architects and facilities managers who need to show a space and build from it, one visit gives you the hosted walkthrough, the photorealistic renders, the measured data, and the CAD or BIM. Modelled in-house in Australia, never offshore. Published fixed prices, a quote within 24 hours, and data back within the week.
01 / Digital twin
Hosted 3D walkthrough
Matterport · VR-ready · hosted
A navigable walkthrough your clients, tenants and buyers explore online, room to room, in any browser. The showcase your marketing, leasing and off-plan displays run on, hosted and ready to share the day it is live.
02 / Renders
Photorealistic renders
High-res stills · JPG · PNG
Marketing-ready visuals of the space, produced from the same capture: photorealistic renders for listings, displays and design presentation, without a separate photo shoot.
03 / As-built
Measured as-builts
DWG · PDF · DXF
The real building, drawn to scale: floor plans, sections and DWG your team documents and coordinates from. The building that exists, ready to work from.
04 / Scan-to-CAD
Measured CAD and BIM
E57 → CAD / BIM
Your scan, built into measured CAD or a coordinated BIM model in Revit, Vectorworks or AutoCAD - LOD 200 by default, LOD 300 where the project needs documentation-ready geometry. Modelled in-house, one team from capture to delivery.
Works with your software. Your scan is delivered in the formats these tools already open: native Revit, Vectorworks and AutoCAD files, plus DWG drawings and the vendor-neutral E57 point cloud that most CAD and BIM software imports.
03 · Pricing
Three tiers, priced on the page
Three tiers, each building on the last. Pay only for the deliverables you need, and see where the price starts before you ever speak to us.
Tier 1 · Walkthrough
A hosted 3D walkthrough to show and share, ready the day it is live. On its own, this is what a virtual-tour provider sells.
- Hosted 3D digital twin
Tier 2 · Walkthrough + floor plans
Everything in Tier 1, plus measured 2D floor plans drawn from the scan. This is what a measured building survey gives you, bundled with the twin.
- Hosted 3D digital twin
- Measured 2D as-built floor plans
Tier 3 · Walkthrough + plans + CAD/BIM
Everything in Tier 2, plus a measured CAD or coordinated BIM model. This is what a scan-to-BIM bureau delivers, all from the one capture and modelled in-house.
- Hosted 3D digital twin
- Measured 2D as-built floor plans
- CAD or BIM model, LOD 200 or 300
Every tier is priced on the size of the space, so the fixed quote scales with gross floor area, the number of levels and how complex the building is. Photorealistic renders and progress capture can be added to any tier. Tell us the building and a fixed price comes back within 24 hours, ex-GST, Greater Sydney.
The hosted twin, after the first year
Every tier includes the first 12 months of twin hosting. After that, it is your call:
Keep it hosted
We keep your twin live for $250 a year. It renews yearly: we confirm the fee at least 30 days ahead, and you can cancel up to 14 days before the renewal date.
Take ownership
We transfer the twin to your own Matterport account at no cost. You host it, nothing more to pay us.
Just the data
Skip the hosted twin and take only the point cloud, CAD or BIM. No hosting, no ongoing fee.
04 · Who runs the scan
Not just another “guy with a scanner”.
Sydney Scan Co is run by the team behind AKA Acoustics, a Sydney acoustic and built-environment design consultancy with project experience for Disney, Dolby, EY and National Parks & Wildlife. That measured, build-to-spec standard goes into every scan.
Reality capture to a designer’s standard. Measured, checked, built to spec.
- Operator
- Founder-run. The same person scans, models and answers the phone.
- Base
- St Peters, Greater Sydney
- Instrument
- Matterport Pro 3, ±20 mm at 10 m
- Direct line
- +61 406 863 099
Show-ready and build-ready, from one visit
Everything from one scan
A walkthrough to show, renders for the marketing, and measured CAD and BIM your team builds from, all off one visit. Most providers give you one of those and send you elsewhere for the rest.
Modelled in-house
We build the CAD and BIM ourselves in Revit, Vectorworks or AutoCAD. One local team from capture to delivery, no offshore handoff and no waiting.
Published prices
Our prices are on the page and the quote is fixed within 24 hours. No "request a quote", no surprises, no chasing a number for a fortnight.
On your programme
On site in days, data back within the week. We work to your timeline, with one point of contact from the first call to delivery.
05 · Live / digital twin · sample twin
Walk through it yourself.
Drag to look around, click to move.
06 · Questions
The questions we get
07 · Guides
Worth a read before you brief us
Taking new Sydney projects now
Tell us about the building.
Send the address and the plans, and a fixed price comes back within 24 hours. Greater Sydney.